Table of Contents
Advertisement
Main Icons
16
USA 6W MEM
Getting Started
TIME:10:00
VHF Marine Radio Protocols
Operating Your Radio
DATE:06/01
Intro
Operation
Customer
Main Icons
SCAN
Assistance
41° 54.523N
SCAN Button
Press and release the SCAN soft key to scan all channels . Scanning
087° 47.192W
EMERG
begins at the selected lower channel, and scans to higher channels .
Press the Channel Up/Down button to change the scan direction .
Customer
Installation
Assistance
Intro
Operation
Customer
H/M/L
SCAN
MEM MORE
When a signal is received in SCAN mode, the radio will pause 10
Assistance
Secondary Icons
seconds before resuming SCAN operation . The scan will stop on the
paused channel and remain there when the Talk button is pressed .
If memory channels are saved, press and release the SCAN button to
Customer
Installation
Assistance
scan all memory channels .
Notice
Caution
Secondary Icons
NOTE
If even one memory channel is saved, SCAN will only scan
memory channels .
Notice
Caution
Squelch Control
Squelch Control
Squelch Control filters weak signals and radio frequency (RF) noise
so that you will clearly hear the signals you want .
The Squelch Control on this radio is set through the following
keypad operation .
To Set Squelch Control:
1. With the power On, press the SQL button to access the
squelch screen .
2. Press the Channel Up and Channel Down soft keys to set
level . The signal level graphic shows squelch level 1 - 8 .
Main Icons
3. To adjust your squelch, press the Channel Down soft
key until you hear a hissing sound, then press
and release the Channel Up soft key until the hissing
stops . This will establish a "Baseline" squelch .
Intro
Operation
Customer
Assistance
4. By pressing the Channel Up soft key further, you will filter
weak and medium strength signals . By pressing Channel
Down soft key, you will receive weaker signals .
Customer
Installation
5. Press the Enter soft key to save this entry and move to the
Assistance
next Setup mode programming .
Secondary Icons
NOTE
If the Squelch is set so that you can hear a continuous hissing
Notice
Caution
sound, the Memory Scan and Tri-Watch functions will be
unusable .
16 English
MRHH600_ENG_MANL.indd 16-17
Warranty
Warranty
Warning
Warning
Warranty
Warning
Main Icons
Setup Mode Programming
Operating Your Radio
VHF Marine Radio Protocols
Intro
Operation
Customer
Warranty
Set-Up Routines
Assistance
Settings Menu
The Settings menu in the CobraMarine VHF radio allows you to turn On and Off many of
its features, to adjust other features to suit your preferences, and to enter your user MMSI
Customer
Installation
Assistance
number .
Secondary Icons
To Enter The Settings Menu:
Menu Soft Key
Press the Menu button .
The Settings menu will appear on the LCD.
After entering the Settings menu, you can scroll
Notice
Caution
Warning
through it to make as many entries as you like .
Whenever the setting selection highlight appears in a feature
portion of the menu, the current active setting is highlighted .
When you are finished with changes, you can exit the Settings
menu by pressing the Exit soft key and return to Standby mode .
MENU
DSC SETUP MENU
To Exit The Settings Menu:
LAMP ADJUST
CONTRAST ADJUST
Use the Up/Down buttons to scroll down to EXIT at the bottom
KEY TONE
of the menu, or press the Exit soft key to move up through the
UIC CHANNEL MODE
TIME ADJUST
menu until the radio returns to the Standby mode.
EXIT
ENTER
NOTE
Channel Up/Down Buttons
Basic set-up routines are described here . For set-up routines
that apply specifically to a particular function, they are included
in the section for that function .
•
Nothing Comes Close to a Cobra
17
®
4/3/17 5:03 PM
Advertisement
Table of Contents
