Table of Contents
Advertisement
SOUND
TXT
b
P
Record
28
Record with your video recorder with EasyLink
0
N
T-C
AUDIO
P
c
d
If you have connected an S-VHS video recorder provided with the EasyLink function,
you can record S-VHS-quality from an S-VHS peripheral connected to the front side
of the receiver. (E.g. from an S-VHS camcorder.)
In TV mode, it is possible to start a direct recording of the programme which is being
displayed on the TV screen.
Press the
record key, under the door of the remote control of the TV
INSTANT
or of the video recorder or the record key on the video recorder..
The video recorder switches on from standby and a message of what is being
recorded appears on the screen.
The video recorder starts recording the programme you are watching.
Switching programme numbers on your TV does not disturb recording !
Press the
key to stop the recording.
When recording a programme from a peripheral connected to
, you can not select another TV programme on the screen.
FRONT
To watch TV programmes again, press the programme number you want to select
twice.
Attention: the recording is stopped and your video recorder switches to standby.
If you switch to standby during recording of a programme from a peripheral
connected to
1, 3 or
EXTERNAL
indicate that you are still recording. The blinking stops after the recording is finished.
, the blinking lamps on the front of your receiver
FRONT
1, 3 or
EXTERNAL
Advertisement
Table of Contents
