For Component Video; Signal) - Philips Brilliance BDH5011 User Manual

User Manual BDH5011
11.2 For Component Video (480p,
720p and 1080i signal)
Accessing Picture Adjustment Mode
Various picture adjustments can be set using the
Picture Adjustment OSD menu.To access the
OSD menu:
1. Press the MENU +/- keys on the remote or
the front control panel.
2. The first menu displayed is the PICTURE
menu. Make sure that the PICTURE OSD
menu is displayed.
3. Use the MENU +/- keys to move up and
down to choose the option you wish to
adjust. An explanation of each adjustment is
listed below.
4. Use the ADJ +/- keys to change the setting.
Notes:
• These controls are available when input
selection is set to: Component 1 and
Component 2 (when the input signal is 480p,
780p or 1080i) inputs.
• To restore picture settings to the factory
defaults, simply press the RECALL key from
the remote control.
CONTRAST
Adjust Contrast to increase the level of 'white'
in the video picture.
Increasing contrast will make white areas of the
video picture brighter. Contrast works in
conjunction with BRIGHTNESS.
BRIGHTNESS
Adjust brightness to enhance the level of dark
areas in the video picture such as night scenes
and shadow scenes. Increasing brightness will
make dark areas more visible.
COLOR
Use color to adjust the color saturation of the
video picture. Increasing color will make the
color more intense. Reducing color setting will
make the color less intense.
TINT
Use tint to adjust the color of fleshtones.
Increasing the tint setting will shift the picture
with more cyan (more green appearance).
Decreasing the setting will shift the picture with
more magenta (more red appearance).
42