Using Your Display - Basics; Powering On / Off - Philips Brilliance BDH5011 User Manual

8. Using your Display - Basics

POWER (Toggle)

8.1 Powering ON / OFF

Using Front Panel or Remote Control
1. Make sure the display is plugged into the wall
2. Press the POWER button on the front panel
3. The display will now turn on after a brief
4. To turn power off, simply press the POWER
Using Discrete Power ON/OFF Keys
1. The discrete POWER ON/OFF keys sends
2. To turn power on, simply press the POWER
DISCRETE
POWER ON/OFF
3. To turn off power, simply press the POWER
Status LED
•
•
•
23
User Manual BDH5011
outlet and the main AC switch located in the
rear of the display is switched to ON
position. If the power is plugged in and the
AC switch is on, the STATUS LED will
illuminate in solid yellow color.
or the remote control.
pause.
The STATUS LED will now turn green to
indicate the power on status.
button on the front panel or the remote
control once again.
two discrete signals to the display.
ON button. If the display is turned on
already, pressing this button will have no
effect.
OFF button. If the display is already turned
off, pressing this button will have no effect.
POWER (Toggle).
Not Illuminated - No AC Power detected If
the main power switch (rear of panel) is
turned off, this LED will not illuminate.
Solid Yellow - Standby (Power OFF) with AC
power detected The LED will illuminate in
yellow color if the display is shut-off but the
main power cord is plugged into the back of
the unit.
Solid Green - Power ON