5
7. GENERAL INFORMATION
7.1 DIAGNOSIS
7.1.1 TEST MODE
Version indication
[Purpose]
The versions for various microcomputers and DSP firmware are displayed.
[How to enter/exit]
During Standby mode, simultaneously press and hold the STANDBY/ON and STANDARD SURROUND keys for 5
seconds to enter this mode. This mode is automatically exited when the indications of all versions have finished.
[Basic operations]
Description of Version
FL Display
Indications
POWER OFF
Mx.xxx : Main microcomputer
Fx.xxx : Display microcomputer
Dx.xxx : DSP microcomputer
Hx.xxx : HDMI microcomputer
HOST microcomputer
(only VSX-AX4AVi-S)
fx.xxx : 1st DSP firmware
sx.xxx : 2nd DSP firmware
Normal display
[Notes]
1. If the version indication becomes "**," a failure in communications between the corresponding microcomputers or
a failure in the corresponding microcomputers is likely.
2. In this submode, the user settings will not be cleared.
5
6
Duration
Devices that can be considered generally
(sec.)
normal, with the corresponding indications
5
Main microcomputer and display microcomputer
5
DSP microcomputer and HDMI microcomputer
5
HOST microcomputer for iLINK connection
5
1st DSP firmware
2nd DSP firmware
VSX-AX4AVi-S
6
7
: Flash ROM (IC105) near the DSP IC
: Flash ROM within the DSP IC (IC201)
7
8
A
B
C
D
E
F
189
8