Table of Contents
Advertisement
3
Choose [
].
●
Press the [ ][ ][ ][ ] buttons or turn
the [ ] dial to choose [
], and then
press the [ ] button.
4
Choose [Add a Device].
●
Press the [ ][ ] buttons or turn the [ ]
dial to choose [Add a Device], and then
press the [ ] button.
5
Choose [Connect with WPS].
●
Press the [ ][ ] buttons or turn the [ ]
dial to choose [Connect with WPS], and
then press the [ ] button.
6
Choose [WPS (PBC mode)].
●
Press the [ ][ ] buttons or turn the [ ]
dial to choose [WPS (PBC mode)], and
then press the [ ] button.
7
Establish the connection.
●
On the access point, hold down the WPS
connection button for a few seconds.
●
On the camera, press the [ ] button to
go to the next step.
●
The camera connects to the access point
and lists devices connected to it on the
[Select a Device] screen.
8
Choose the target device.
●
Choose the target device name (either
press the [ ][ ] buttons or turn the [ ]
dial), and then press the [ ] button.
9
Install a driver (first Windows
connection only).
●
When this screen is displayed on the
camera, click the Start menu on the
computer, click [Control Panel], and then
click [Add a device].
●
Double-click the connected camera icon.
●
Driver installation will begin.
●
After driver installation is complete, and
the camera and computer connection
is enabled, the AutoPlay screen will be
displayed. Nothing will be displayed on
the camera screen.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
123
Hide quick links:
Advertisement
Table of Contents
