Remote Control; General Functions - Philips BDL5571V User Manual

2.4. REMOTE CONTROL

2.4.1. GENERAL FUNCTIONS

POWER button
Press to switch on the monitor from standby mode. Press again to turn it
off to standby mode.
SMART button
To select smart picture mode from:
 Standard: for images (factory setting)
 Highbright: for moving image such as Video
 sRGB: for text based images
VIDEO SOURCE button
To activate the video source selection menu. Press it repeatedly to select
the video input source from DP, DVI-D, VGA, HDMI and Component.
AUDIO SOURCE button
To activate the audio source selection menu. Press it repeatedly to select
the audio input source from HDMI, AUDIO1, AUDIO2, and AUDIO3.
Picture format button
To switch screen aspect ratio between
PC signal: Full, Normal, Custom and Real.
Video signal: Full, Normal, Dynamic, Custom and Real.
PIP (Picture In Picture) buttons
ON/OFF button: To turn PIP mode ON/OFF.
INPUT button: To select the input signal for the sub-picture.
CHANGE button: To exchange between the main picture and
CONTRAST button
Press to open the Contrast OSD selection, and then press the PLUS or
MINUS button to adjust the value.
BRIGHTNESS button
Press to open the Brightness OSD selection, and then press the PLUS or
MINUS button to adjust the value.
17
sub picture.
User Manual BDL5571V