Table of Contents
Advertisement
Preparation for use and operation
Hard disk's energy saving function
If the hard disk is not accessed for a predefined period of time, its motor switches off automatically.
It will automatically switch on again when the hard disk is next accessed.
Activating
In the BIOS Setup menu set the Power Setup - Power Savings field to Customize and set the time
which has to elapse before the motor of the hard disk switches off in the Hard Disk Timeout
field.
or
In the BIOS Setup menu set the Power Setup - Power Savings field to Maximum Performance or
Maximum Power Savings.
Loudspeakers
Disabling:
+
Enabling:
+
Volume adjustment
Increasing the volume:
Decreasing the volume:
You can also adjust the volume of the loudspeaker by using the audio program (e.g. mixer) or using
the audio functions in an application program.
Changing display settings
You configure the basic display settings in the BIOS Setup menu Main (see manual "BIOS Setup").
Switching between internal and external screen
You can opt to use:
•
just the notebook's internal display
•
just the external display
•
both the internal and the external display.
•
just the television
After the notebook is switched on, the setting in the BIOS setup of the Advanced Setup - System
Configuration Menu - Display Device field becomes effective.
If an external monitor is connected, you can switch over the screen output with the
combination.
Press the key combination
40
+
+
+
until you find the display option you require.
Volume adjustment
+
key
A26391-K82-Z101-3-7619
Advertisement
Table of Contents
