Panorama Mode - Kodak PIXPRO AZ401 User Manual

Panorama Mode

With panorama mode, you can take a
series of pictures which will be stitched
automatically into a ultra-wide panoramic
picture by the camera.
Follow the steps below:
1. Turn the mode dial to panorama mode
( ) .
2. Press the arrow buttons to select a
shooting direction. (The right direction
is used as default if you do not make
any choice) 2 seconds later, the
camera is ready to take pictures. You
can also press the
press the shutter button to be ready to
take pictures.
3. Compose the first view of the
panoramic picture on the LCD and
press the Shutter button to capture the
image.
30 30
button or half
4. When you finish shooting the first photo,
two target icons will display on the LCD
at left and right sides. Move the camera
to the right until the round target icon
is directly positioned over the square
box. The box will turn green when they
overlap and the camera will automatically
take the next picture. Repeat the same
steps for additional shots. Up to 4 frames
can be stitched together.
5. If continuous pictures are less than
4 shots, press the
the camera will stitch the pictures
automatically. Press the playback button
to enter playback mode to see the effect.
6. If you take 4 pictures, the camera will
automatically stitch the pictures. Press
the playback button to enter playback
mode to see the effect.
Cancel
Save
button and