Ejecting Media - Acer TravelMate 340 User Manual

3. Firmly connect the EasyLink Combo Drive (connector to connector) to the
computer.
To disconnect the EasyLink Combo Drive:
1. Click on the HotIDE icon (
2. Select the stop operation.
A message appears to confirm the stop operation.
3. Click on OK.
4. Disconnect the EasyLink Combo Drive.
5. Tuck in the EasyLink Combo Drive cable connector into its storage slot.
Note: If the computer is on, and you disconnect the EasyLink Combo Drive
without using the HotIDE stop function, the computer will hang (stop
operating normally). Connect the EasyLink Combo Drive again to solve this
problem. It is advisable to follow the connect/disconnect procedures
discussed above. If the computer is off, you can disconnect the EasyLink
Combo Drive at your convenience.

Ejecting media

Ejecting a floppy disk
Press the floppy disk eject button to eject a floppy disk from the floppy drive.
) on the Windows taskbar.
17