Audi A8 2003 Workshop Manual page 247

10-cylinder direct petrol injection engine (5.2 ltr. 4-valve), mechanics - Edition 10.2013
Aligning tailpipes
– Check clearance between tailpipes (left and right) and bumper
cover:
• Dimension -x- (left-side) = dimension -x- (right-side)
If necessary, correct dimension "x" as follows:
– Slacken bolt connection -arrow- on brace between exhaust
pipes.
– Adjust the distance between the rear silencers.
– Tighten connection.
Tightening torques
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
♦ ⇒ "1.1 Exhaust system - exploded view", page 224
with respect to the correctness of information in this document. Copyright by AUDI AG.
Audi A8 2003 ➤
241
1. Exhaust system