Operating The Telos 590 Nextgen; Front Panel Functions; Remote Control - Goldmund TELOS 590 NextGen User Manual

NOTE
Place the "+" side of the remote's
battery on the battery enclosure as
shown on the picture. Use a CR2032,
3V battery.
2

OPERATING THE TELOS 590 NEXTGEN

2.1

FRONT PANEL FUNCTIONS

The back panel inputs are selected by selecting input knob on the front panel.
When the digital input has been selected, the orange led will be displayed on the front panel
only when the digital source has been locked to the source frequency. In analog and USB
input the orange led is always on.
OUTPUT VOLUME ADJUSTMENT
The level control may be adjusted manually with the front panel knob or by remote control. It
acts for all channels simultaneously.
2.2

REMOTE CONTROL

Your Telos 590 NextGen has built-in remote control for volume, mute, standby and input
selection.
OUTPUT VOLUME ADJUSTMENT
To adjust the global volume use the upper and lower arrow.
OUTPUT VOLUME ADJUSTMENT
To select the input use the left and right arrow.
MUTING & STANDBY
The mute circuit is controlled using the remote. To mute or un-mute the Telos 590 NextGen
with the remote press the central key.
To put your unit in standby, press the lower left key, the display will turn off completely.
GOLDMUND TELOS 590 NextGen – Integrated Amplifier - 7