Sony Ericsson W880i Troubleshooting Manual page 11

Problem Area Items to Inspect
Inspect the two camera flex
assembly connections to the circuit
board
If the issue has not been resolved !
If the issue is still not resolved!
4/000 21-1/FEA 209 544/123 A
©
Company Internal Sony Ericsson Mobile Communications AB
Repair Action
•
If either connection is improperly
connected - Reestablish proper
connection
•
If one or both of the connections is
dirty or oxidized – Clean both halves
of the connection(s)
•
If any portion on the camera assembly
flex film is damaged – replace the
camera flex assembly
•
If either of the camera flex assembly
connections on the circuit board is
damaged – Send to a repair location
allowed to perform electrical repairs
on this product
•
Replace camera flex assembly if it
has not already been replaced
•
Send to a repair location allowed to
perform electrical repairs on this
product
Trouble Shooting Guide, Mechanical
Inspection Reference
11(30)