Scan Advance; Nuisance Delete - Motorola T5600 User Manual

checks for activity on each channel, but only for codes – . Transmissions using
1 38
code are ignored.
0
When the radio detects channel activity, it stops on that channel and displays the
code in use.
While the radio is scanning through the channels, is displayed. When activity on
h
a channel is detected, the radio stops scanning and you can hear the transmission.
The display shows the channel and code on which activity was detected.
To respond to the transmission, press within 5 seconds.
M
To stop scanning, briefly press and release or .
Q J

Scan Advance

If the radio stops on a channel you don't want to listen to while it is scanning, briefly
press or to resume scanning for the next active channel.
[ ]

Nuisance Delete

If the radio continuously stops on an undesired channel while it is scanning, press
and hold or for at least 3 seconds, then release. This temporarily removes the
[ ]
undesired channel from the scan list. To restore the channel, turn the radio off and
then on.
Note: You cannot remove your home channel from the scan list. The home channel
is the channel your radio was set to when you activated scan.
22