3.
Install the VGA module.
4.
Install the control panel assembly cover for rack mode into the control panel assembly.
5.
Remove the system top cover.
6.
Install the control panel assembly for rack mode into the chassis.
7.
To attach the rack ears, complete the following steps:
a. Align the screw holes on the right rack ear with the screw holes on the right side of the rack system.
b. Install the screws using a Phillips #2 screwdriver.
Figure 98. Removing and installing the rack ears
1. front panel
3. screw for each rack ear (3)
Next steps
1.
Install the system cover.
2.
Install the system in a rack. For more information, see the system's Rack Installation Guide at Dell.com/poweredgemanuals.
Related links
Removing the system feet
Removing caster wheels
Removing the system cover
Removing the control panel assembly
Removing the control panel assembly cover
Installing the optional VGA module
Installing the control panel assembly cover
Removing the system top cover
Installing the control panel assembly
150
2. rack ear (2)