Before Working Inside Your Computer; Before You Begin; Safety Instructions - Dell Aurora R6 Service Manual

Before working inside your
computer
NOTE: The images in this document may differ from your computer
depending on the configuration you ordered.

Before you begin

1 Save and close all open files and exit all open applications.
2 Shut down your computer.
Windows 10: Click or tap Start →
NOTE: If you are using a different operating system, see the
documentation of your operating system for shut-down
instructions.
3 Disconnect your computer and all attached devices from their electrical
outlets.
4 Disconnect all cables such as telephone cables, network cables, and so on,
from your computer.
5 Disconnect all attached devices and peripherals, such as keyboard, mouse,
monitor, and so on, from your computer.
6 Remove any media card and optical disc from your computer, if applicable.
7 After the computer is unplugged, press and hold the power button for 5
seconds to ground the system board.

Safety instructions

Use the following safety guidelines to protect your computer from potential
damage and ensure your personal safety.
WARNING: Before working inside your computer, read the safety
information that shipped with your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
12
Power → Shut down.