Operating Limits - Trane WFE 1 Technical Manual

Fan coil units
Table of Contents

Advertisement

15
LIMITI DI IMPIEGO
I dati fondamentali relativi al ventil-
convettore e allo scambiatore di
calore sono i seguenti:
Ventilconvettore
e scambiatore di calore:
• Temperatura massima
del fluido termovettore:
max 70°C
• Temperatura minima
del fluido di raffreddamento:
min 6°C
• Pressione
di esercizio massima: 1000 kPa
• Tensione di alimentazione:
230V - 50Hz
• Consumo di energia elettrica:
vedi targhetta dati tecnici
• Grado di protezione: IP 20
I dati tecnici delle valvole con
azionatore termoelettrico sono i
seguenti:
Valvole con
azionatore termoelettrico:
• Pressione di esercizio: 1000 kPa
• Tensione di alimentazione:
230V~50Hz
• Rating/protezione VA: 5 VA
• Tempo di chiusura: 180 sec.
• Contenuto massimo
di glicole nell'acqua: 50%
Altri dati tecnici
Tutti gli altri dati tecnici importanti
(dimensioni, pesi, collegamenti, ru-
morosità, ecc.) vengono forniti in
altre parti del presente Manuale,
nella documentazione tecnica a
parte o nella proposta tecnica.
SMALTIMENTO
Le parti di consumo e quelle sosti-
tuite vanno smaltite nel rispetto del-
la sicurezza e in conformità con le
norme di protezione ambientale.

OPERATING LIMITS

The basic specification of the fan
coil and heat exchanger is given
below:
Fan coil
and heat exchanger:
• Maximum
temperature
of heat vector fluid: 70°C
• Minimum
temperature
of refrigerant fluid: 6°C
• Maximum
working pressure: 1000 kPa
• Power supply voltage:
230V - 50Hz
• Electric energy consumption:
see technical data label
• Index of protection: IP 20
The technical specification of the
valves with thermoelectric actuator
is given below:
Valves with
thermoelectric actuator:
• Working pressure: 1000 kPa
• Power supply voltage:
230V~50Hz
• Rating/VA protection: 5 VA
• Closing time: 180 sec.
• Maximum glycol content
in water: 50%
Other technical data
All other important technical data
(dimensions, weights, connections,
noise emissions, etc.) are given
elsewhere in this User Information
Manual, in the separate technical
documentation or in the technical
proposal.
WASTE DISPOSAL
Consumables and replaced parts
should be disposed of safely and
in accordance with environmental
protection legislation.
UNT-SVX040A-XX

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents