Product Features; Global Product Features - Philips 42-inch 3D-Intelligent Display 42-3D6C01/00 User Manual

Display User Manual

2 Product features

2.1

Global product features

Multi-view Lenticular Display
o 9 view autostereoscopic 3D display
o Non-switchable lenticular technology
o Optimal viewing distance: 3 meters (10 feet).
o Wide comfort zone for 3D perception
o Full brightness, full contrast
o 2D-plus-Depth or Declipse input in 3D mode
o Protective plate at the front side of the display
Advanced display signal processing engine
o Integrated 3D display processing hardware
o Open 3D data interface
o 2D-plus-Depth converted to 9 different views and interwoven into a 3D image
o Rendering algorithm is tuned for lenticular optical behaviour
o Two modes:
•
3D rendering mode
•
2D transparent mode with picture quality improvement filter
Connectivity
o Display control via DDC/CI channel; no additional RS232 cable needed
o AC switch
o A LED indicates 'power on' and 'standby' mode
1 For an elaborate explanation on the WOWvx display interface formats see the '3D Interface Specifications -
white paper' and '3D Content Creation Notes' documents. Both can be downloaded from the download section
on http://www.philips.com/3dsolutions.
©2008 Philips Electronics Nederland B.V.
1
3D Solutions
23 September 2008
7 of 26