Connecting The Display - Philips 42-inch 3D-Intelligent Display 42-3D6C01/00 User Manual

Display User Manual
3D Solutions
3.6

Connecting the display

NEVER (dis)connect DVI when your PC or Display is on.
2D monitor
(optional)
DVI cable
DVI cable
PC 3D Display
Power cord
A second 2D display may be connected to the PC. Only use a DVI cable and graphics card that is
compliant with the DVI standard (see reference to DVI standard in Error! Reference source not
found.)
The picture below show the DVI-connector and power connector on the back of the display
1
2
Make sure the PC and Display are switched off!
1. Connect the PC via the DVI cable to the DVI connecter.
2. Connect the power cord.
23 September 2008
14 of 26 ©2008 Philips Electronics Nederland B.V.