B. Physical considerations:
High-frequency components should be mounted as
shown in Figure 8.
FIGURE 8. MOUNTING THE 2360 HIGH-FREQUENCY HORN
As indicated in the previous section, the loudspeak-
ers should be positioned about one-third the way up the
screen. If the screen is flat, as shown in Figure 9A, the
flanking loudspeakers should be toed in slightly. Where
FIGURE 9. PLACING THE LOUDSPEAKERS BEHIND THE SCREEN
A. FLAT SCREEN
14
BI-RADIAL HORN
A L I G N REAR O F 2506
W I T H REAR O F
L F E N C L O S U R E
the screen is curved, as shown at B, the loudspeakers
may be positioned normal to the screen at each position.
The high-frequency horns should be placed within 7 5 -
100 mm (3 to 4 in) from the screen.
VIEW FROM A B O V E
2506 ADAPTER
HF DRIVER
LF ENCLOSURE