Philips 40PFL4706 User Manual page 33

Proxy confi guration
1
Press MENU on the remote control and then use Î /ï/Í /Æ to
select [Setup] > [Installation] > [Network] > [Manual network
settings] > [Proxy confi guration].
2
Use Î /ï to select a setting and then press OK.
• For default settings, select [Do Not Use].
• If you need to change the proxy setting as instructed by your
internet service provider to set the designated proxy address
and port, select [Use].
Setting items Description
Do not Use
Not use the proxy server.
Proxy setting
Use Uses the proxy server.
Selects the number or word by using
Î /ï/Í /Æ, then press OK.
[Clear]: Clear the entered number or word.
[All clear]: Clear all the entered numbers or
Proxy address *
words.
[a/A/@]: Switch between abc, ABC and @ ! ?
[Cancel]: Shows the cancellation display.
[
Use Î /ï or the Number buttons to input
Proxy port *
numbers.
* Items can be selected only when [Proxy port] is set to [Use].
3
Press MENU to exit.
Note
•
The range of input numbers for the port number is between 0 and 65535.
(If you enter a number larger than 65535, it will be regarded as 65535.)
•
For proxy port, the selected ports may be blocked and not be able to use depending
on your network environment.
•
If the proxy address is entered with blank only, proxy server setting will be set to
[Do Not Use].
Setting status
You can check the status of network settings.
1
Press MENU on the remote control and then use Î /ï/Í /Æ to
select [Setup] > [Installation] > [Network] > [Setting status].
• Network setting list will be displayed.
• MAC address of this unit will be displayed in the list.
2
Press MENU to exit.
Reset network settings
You can reset the status of network settings.
1
Press MENU on the remote control and then use Î /ï/Í /Æ to
select [Setup] > [Installation] > [Network] > [Reset network
settings] > [Start now].
2
Press OK to reset the network settings.
3
Press MENU to exit.
Netfl ix deactivation
Displays the deactivation setting for Netfl ix.
1
Press MENU on the remote control and then use Î /ï/Í /Æ to
select [Setup] > [Software] > [Netfl ix deactivation].
2
Use Î /ï to select the desired option, then press OK.
Setting items Description
Yes
Deactivate the connection to Netflix.
No
Activate the connection to Netflix.
3
Press MENU to exit.
EN EN
32
OK]: Set the entered number or word.
Netfl ix ESN
Displays the ESN information.
1
Press MENU on the remote control and then use Î /ï/Í /Æ to
select [Setup] > [Software] > [Netfl ix ESN].
• Displays the ESN (Electronic Serial Number) to get any
services from Netfl ix.
2
Press MENU to exit.
VUDU deactivation
Displays the deactivation setting for VUDU.
1
Press MENU on the remote control and then use Î /ï/Í /Æ to
select [Setup] > [Software] > [VUDU deactivation].
2
Use Î /ï to select the desired option, then press OK.
Setting items Description
Yes
Deactivate the connection to VUDU.
No
Activate the connection to VUDU.
3
Press MENU to exit.
YouTube deactivation
Displays the deactivation setting for YouTube.
1
Press MENU on the remote control and then use Î /ï/Í /Æ to
select [Setup] > [Software] > [YouTube deactivation].
2
Use Î /ï to select the desired option, then press OK.
Setting items Description
Yes
Deactivate the connection to YouTube.
No
Activate the connection to YouTube.
3
Press MENU to exit.