Table of Contents
Advertisement
3.9
P
P/PCI C
N
PNP OS Installed
When set to YES, BIOS will only initialize the PnP cards used for the
boot sequence (VGA, IDE, SCSI). The rest of the cards will be initialized
by the PnP operating system like Window™ 95. When set to NO, BIOS
will initialize all the PnP cards. For non-PnP operating systems (DOS,
Netware™), this option must set to NO.
The Choices: No (Default) / Yes
Reset Configuration Data
The system BIOS supports the PnP feature which requires the system to
record which resources are assigned and protects resources from
conflict.
Every peripheral device has a node, which is called ESCD. This node
records which resources are assigned to it. The system needs to record
and update ESCD to the memory locations. These locations are
reserved in the system BIOS. If the Disabled (default) option is chosen,
the system's ESCD will update only when the new configuration varies
from the last one. If the Enabled option is chosen, the system is forced
to update ESCDs and then is automatically set to the "Disabled" mode.
The above settings will be shown on the screen only if "Manual" is
chosen for the resources controlled by function.
ONFIGURATIONS
CX70M-I7B
49
Advertisement
Table of Contents
