Table of Contents
Advertisement
Boot Up NumLock Status
Selects the NumLock State after the system switched on.
The Choices:
The Choices:
On (Default)
Off
Gate A20 Option
Sets Gate A20 controlled by chipset or a pin in the keyboard controller.
The Choices: Fast (Default) / Normal
Typematic Rate Setting
When a key is held down, the keystroke will repeat at a rate determined
by the keyboard controller. When enabled, the typematic rate and
typematic delay can be configured.
The Choices: Disabled (Default) / Enabled
Typematic Rate (Chars/Sec)
Sets the rate at which a keystroke is repeated when you hold the key
down.
The Choices: 6 (Default) / 8 / 10 / 12 / 15 / 20 / 24 / 30
(This option can be set only when "Typematic Rate Setting" is enabled.)
Typematic Delay (Msec)
Sets the delay time after the key is held down before it begins to repeat
the keystroke.
The Choices: 250 (Default) / 500 / 750 / 1000
(This option can be set only when "Typematic Rate Setting" is enabled.)
Security Option
This option will enable only individuals with passwords to bring the
system online and/or to use the CMOS Setup Utility.
The Coices:
System:
A password is required for the system to boot and is
also required to access the Setup Utility.
Setup (Default): A password is required to access the Setup Utility
only.
This will only apply if passwords are set from the Setup main menu.
Numpad is number keys.
Numpad is arrow keys.
CX70M-I7B
31
Advertisement
Table of Contents
