Dimensions And Weight; Environmental Specifications; Static Characteristics - Miller Auto-Continuum 350 Owner's Manual

4-4. Dimensions And Weight

Hole Layout Dimensions
A 17-33/64 in. (445 mm)
B 17-3/8 in. (441 mm)
C 26-11/64 in. (665 mm)
D 16-3/32 in. (409 mm)
E 2-9/32 in. (58 mm)
F 15/32 in. (12 mm)
15/32 x 1 in.
G
(12 x 25mm)
Weight
350 Model:
130 lb (59.4 kg)
350 Model w/Aux Power:
139 lb (63.5 kg)
500 Model:
151 lb (69 kg)
500 Model w/Aux Power:
160 lb (73.1 kg)
Lifting Eye Weight Rating:
1000 lb (453 kg) Maximum

4-5. Environmental Specifications

A. IP Rating
This equipment is designed for outdoor use. It may be stored, but is not intended to be used for welding outside during precipitation unless
sheltered.
B. Temperature Specifications
Operating Temperature Range*
14 to 104 °F (-10 to 40°C)
*Output is derated at temperatures above 104°F (40°C).

4-6. Static Characteristics

The static (output) characteristics of the welding power source can be described as flat during the GMAW process and drooping during the CAC−A
process. Static characteristics are also affected by control settings (including software), electrode, shielding gas, weldment material, and other factors.
Contact the factory for specific information on the static characteristics of the welding power source.
A
D
E
C
B
IP Rating
IP23S
**28−7/32 in.
(717 mm)
G
18-3/16 in.
(462 mm)
F
*Height includes lifting eye
**Length includes E−Stop cover
Storage/Transportation Temperature Range
−4 to 131 °F (−20 to 55°C)
*27-3/16 in.
(691 mm)
24-57/64 in.
(632 mm)
907657-tp1
IP23S 2014−06
Temp_2016- 07
OM-273473 Page 13