System Clear; Programming Instructions - Panasonic KX-T30810-1 Service Manual

(One pair)

Programming Instructions

I. At extension 11:
All system programming changes (example: system
clear, station program clear, toll restriction,
hookswitch flash timing...) are done through
extension 11.
•
Extension must always be a Panasonic
11
model, KX-T30830.
2. System Program Switch setting:
The System Program Switch located on the KX-
T30810 must be set to the PROGRAM position
while making program
programming changes are completed, return the
program switch to the SET position.
3. Overlay:
This overlay is used for programming the system
and the program function names on buttons are
inscribed on this card. Refer to page 7.
4. Before system programming, you may operate
system clear and station program clear to set
default data of programming.
A. System Clear:
I Dial (99).
•

"SYSTEM CLEAR

2 Press the NEXT button.
•
"ALL CLEAR?" will be displayed.
3 Press the MEMORY button to clear system.
4 To exit from system clear, press the END
button.
The following features are preset as the default
data.
Date and Time
System Speed Calling
CO Connection Assignment
Dial Mode (Tone/ Pulse) Selection
Switching Mode ( Dayl Night Service)
Starting Time (Day/Night Service)
Flexible Day Outward Dialing Assignment
Flexible Night Outward Dialing Assignment
Flexible Day Ringing Assignment
Flexible Night Ringing Assignment
Toll Restriction—Class Assignment
Toll Restriction—Area Code Selection
Programmable Operator Call
Host PBX Access Codes Assignment
Automatic Answering (Automatic/Manual)
Selection
PROGRAMMING
changes. After all
-
will be displayed.
Preferred Line Assignment
Programmable Call Waiting
Duration Time Count Start Mode
Hookswitch Flash Timing
Disconnect Time
Calling Party Control (CPC) Signal
Intercom Alerting Mode
Programmable Doorphone
Dial Call Pickup Group Assignment
Busy Tone Selection
Hold Time Reminder
Hold Recall Time Set
Programmable External Paging Access Tone
DTMF Receiver
Programmable Toll Prefix
Programmable Secret Auto Dial
Station Program Clear: I
B.
Dial (98).
•
"EXT CLEAR" will be displayed.
2 Press the NEXT button.
•
"ALL CLEAR?" will be displayed.
3 Press the MEMORY button to clear the
system.
4 To exit from station clear, press the END
button.
The following features are preset as the
default data.
One Touch Dialing
Background Music
Call Forwarding
Data Line Security
Dial Call Pickup Deny
Do not Disturb