Identification Of Controls; Getting Started - NAD CI 580 Owner's Manual

INTRODUCTION

GETTING STARTED

WHAT'S IN THE BOX
Packed with your CI 580 you will find
•
Two detachable mains power cord
• Terminal connector block
•
Quick Setup Guide
NOTE
Follow enclosed Quick Setup Guide to help you get started with your
CI 580.

IDENTIFICATION OF CONTROLS

1 2
1 2 3 4
PREAMPLIFIER OUTPUT
3
1 STANDBY BUTTON
•
Press and hold this button to bring the CI 580 to standby mode.
2 STATUS INDICATOR
•
This is an indicator of network connectivity. Below is a table of the
LED blink codes and their corresponding descriptions.
LED BLINK CODE
Short red flash, then flashing green
Solid red
Solid red
Solid white
Solid blue
Flashing green
Alternate flashing red and green
Flashing red
3 ANALOG IN
•
Input for line level sources such as CD player, tuner or any
compatible devices. Use a twin RCA-to-RCA lead to connect the
source device's left and right "Audio Output" to this input. The source
will appear as an "Analog Input" in the navigation drawer of the
BluOS App.
4
BluOS Network Music Player CI 580
OPTICAL COAXIAL OPTICAL COAXIAL OPTICAL COAXIAL
L OUT 1 OUT 1 OUT 2 OUT 2 OUT 3 OUT 3
R
1 2 3
IN DIGITAL PREAMPLIFIER OUTPUT
4
DESCRIPTION
Powering up, rebooting
Booting up
Cannot boot up; drive error
Indexing
Connected to network – ready to use
with Bluesound App
No internet gateway
Upgrade mode
Factory reset in progress
SAVE THE PACKAGING
Please save the box and the packaging that came with the CI 580. Should
you move or need to transport your CI 580, this is the safest container to
use. We've seen too many otherwise perfect components damaged in
transit for lack of a proper shipping carton. So please, save that box!
OPTICAL
OPTICAL COAXIAL LAN/USB SERVICE IR IN
OUT 4 OUT 4 IN
OUT
IN
4
+12VTRIGGER
IN
5 6 7 8
PREAMPLIFIER OUTPUT (1-4)
•
Connect any or all preamplifier output ports to corresponding audio
input ports of compatible amplifiers, receivers or processors.
• Use a twin RCA-to-RCA lead to connect the left and right
"Audio Input" of a power amplifier or processor to a particular
PREAMPLIFIER OUTPUT port.
•
Audio output for each preamplifier output is dependent upon
the current or selected source of the particular Player. This is
configurable via the BluOS App.
• Refer to the sample table below showing selected sources for
particular Players and their corresponding preamplifier or optical/
coaxial audio output. The selected Source shown is an example
only. The Source can be any media available from the BluOS App's
navigation drawer.
SELECTED SOURCE FROM
PLAYER
NAVIGATION DRAWER
Analog input CI580-XXXX
Optical input CI580-XXXX-2
Library CI580-XXXX-3
Music Streaming Service CI580-XXXX-4
© NAD CI580
SYSTEM INTERRUPT 100-240V 50/60Hz
5V-30V AC/DC
+ -
© NAD CI580
9 10
PREAMPLIFIER OPTICAL/COAXIAL
OUTPUT OUTPUT
1 2 3 4 1 2 3
✓ ✓
✓ ✓
✓ ✓
✓
4
✓