Indication Lights; Warning Lights; Problems - Electrolux ERGORAPIDO LITHIUM User Manual

18 18
Indication lights-normal operation
1 – 3 Orange lights during operation
Orange light when placed in the charging stand
Orange light blinks once every minute in the
charging stand .

Warning lights

Orange light blinking + product stops
EN
Red light - blinking
Red + Orange light blinking + BRUSHROLLCLEAN
® function does not work + headlights are turned
OFF
IND
RED light – constant + ERGORAPIDO® stops
Problem
KR
The UV-light in the Bed Pro Power nozzle does
not activate.
TH
VIET
CH
TW
APAC_ErgoIFU_BED_Master.indd 18
What does it mean?
3 lights = Battery capacity is still good > 75 % left
2 lights = Battery capacity is still good > 25 % left
1 light = ERGORAPIDO® will stop in a few minutes.
No problem - ERGORAPIDO® is being charged
No problem –ERGORAPIDO® is fully charged.
What is the problem
Battery is empty
The brush roll in floor nozzle or the Bed Pro Power nozzle
is jammed with too much hairs or fibers.
The BRUSHROLLCLEAN ® function has been used for too
long time.
ERGORAPIDO® is overheated
Possible cause
UV Active button not pressed ON.
Bed Pro Power nozzle is not in contact with bedding
mattress.
The UV light may not always activate when the nozzle is
in use on some darker colored or patterned bed sheets.
Sensors are dirty.
What to do?
OK
OK
Finish cleaning + charge ERGORAPIDO®
OK
We recommend to keep ERGORAPIDO® in the
charging stand after using it.
What to do?
Charge ERGORAPIDO®.
Remove the brush roll and clean it manually
Place ERGORAPIDO® in the charging stand for 10
minutes to reset the function.
Clean the filters . Check the hose and nozzle for
blockages. If this does not help, please contact a
service station.
What to do?
Press UV Active button.
Make sure Bed Pro Power nozzle has contact with
bed.
Use on lighter bed sheets.
Clean sensors with cotton swabs, see cleaning and
care.
2016-05-31 11:09:54