Advertisement
QuickSpecs
Overview
This document covers the HP ProLiant BL280c G6 server blade only. For more information on HP BladeSystem c-Class Enclosures
and HP BladeSystem c-Class Interconnect and Mezzanine Components, please see the following:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_div/12790_div.html
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/12810_div.html
HP BladeSystem c-Class Interconnect and Mezzanine Components:
http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html
http://h18004.www1.hp.com/products/blades/components/c-class-adapters.html
HP ProLiant BL280c G6 server blade includes:
Processor:
Processor
Processor
Processor
Up to two (2) Intel® Xeon® 5600 or 5500 series processors
Intel® 5500 chipset
Memory:
Memory
Memory
Memory
Twelve (12) DIMM slots
Up to 192GB memory with PC3-10600 (DDR3) Registered (RDIMM) memory, operating at 1066MHz when fully
populated at 2 DIMMs per Channel in 12 slots.
Up to 48GB, using PC3-10600 DDR3 Unbuffered (UDIMM) memory, operating at 1066MHz when fully populated at
2 DIMMs per Channel in 12 slots
1333MHz available when fully populated 2 DIMMs per Channel with ROM update via ROM Based Setup Utility
(RBSU).
Internal Drive Support:
Internal Drive Support
Internal Drive Support
Internal Drive Support
Up to two (2) small form factor (SFF) HP Solid State Drives (SSD) For ProLiant Server Blades
Up to two (2) small form factor (SFF) SATA or SAS Non-Hot Plug hard disk drives
Storage Controller:
Storage Controller
Storage Controller
Storage Controller
HP Embedded SATA RAID Controller
NOTE: This is a chip set SATA RAID controller. It supports RAID 0 and 1 only and no Battery Backed Write Cache. User
NOTE:
NOTE:
NOTE:
needs to enable the RAID option through HP RBSU (ROM Base Setup Utility) first before the RAID can be activated.
Users also need to download the OS driver from the
Monitoring.
Network Controller
Network Controller:
Network Controller
Network Controller
One (1) HP Integrated NC362i Dual Port Gigabit Server Adapter
Additional Ethernet adapter ports available via the mezzanine expansion slot
One (1) additional 10/100 network adapter dedicated to iLO 2 Management
Mezzanine Support
Mezzanine Support:
Mezzanine Support
Mezzanine Support
Two (2) I/O expansion mezzanine slots
Supports up to two (2) additional mezzanine cards of your choice:
Dual-Port FlexFabric Adapter mezzanine options
Dual-Port Fibre Channel Mezzanine (4-Gb or 8-Gb) options for SAN connectivity
Ethernet server adapter mezzanine options for additional network ports
InfiniBand (IB) Mezzanine options for low latency and high bandwidth server interconnectivity
I/O Accelerator mezzanine options for high transaction rate local storage
SAS mezzanine option for external direct attach and shared SAS storage
Internal USB Support:
Internal USB Support
Internal USB Support
Internal USB Support
One (1) internal USB 2.0 connector for security key devices and USB drive keys
One (1) internal SD-HC card slot
Security - Trusted Platform Module:
Security - Trusted Platform Module
Security - Trusted Platform Module
Security - Trusted Platform Module
HP ProLiant BL280c Generation 6 (G6) Server Blade
HP ProLiant BL280c Generation 6 (G6) Server Blade
HP ProLiant BL280c Generation 6 (G6) Server Blade
HP ProLiant BL280c Generation 6 (G6) Server Blade
DA - 13294
Worldwide — Version 22 — May 20, 2011
http://www.hp.com/support/BL280cG6
website for OS Array
Page 2
Advertisement
