Channel Management; Digital Reception Test; Factory Settings - Philips Cineos 32PFL7403 User Manual

6.3.2 Uninstall or reinstall a channel
To uninstall a stored channel so that it is no longer
possible to tune to.
Reinstall an earlier uninstalled channel.
‡ Press Menu on the remote conrol and select TV
menu > Installation > Channel installation >
Rearrange.
® Press π to enter the channel list.
Ò Press o or π in the channel list to select the
channel you want to uninstall or reinstall.
† Press the green key to uninstall or reinstall the
channel.
º Press Menu to quit the menu.
6.3.3 Reorder the channels
Change the order of the stored channels.
‡ Press Menu on the remote conrol and select TV
menu > Installation > Channel installation >
Rearrange.
® Press π to enter the channel list.
Ò Press o or œ in the channel list to select the
channel you want to reorder.
† Press the yellow key to move up the highlighted
channel in your channel list.
º Press the blue key to move down the
highlighted channel in your channel list.
◊Press Menu to quit the menu.
6.4 Automatic

channel management

Once a day, at 5 AM, all available TV channels are
updated automatically. The update is done if your
TV is in standby.
Earlier stored channels not found by the update will
be removed from the channel list.
You can do this update yourself anytime.
‡ Press Menu on the remote control and select
TV menu > Installation > Channel installation >
Installation update.
® Press π to enter the Installation update menu.
Ò Press
OK .
† Press the green key to start.
The update starts and may take a few minutes.
º When the update is completed, press the red
key to return to the Channel installation menu.
◊Press Menu to quit the menu.
Channel installation
6.5

Digital reception test

If you receive Digital TV broadcasting you can check
the quality and signal strength of a specific channel.
‡ Select a channel.
® Press Menu on the remote control and select
TV menu > Installation > Channel installation >
Digital:Test reception.
Ò Press π to enter
† Press
OK .
The channel frequency, the network name, the
signal quality and strength appear.
º Press the green key to start or directly enter
the frequency of the channel you want to test.
If the signal quality and strength are poor,
reposition the antenna.
◊Press the yellow key to store the frequency if
the signal quality and strength are good.
‹ Press the red key to return to the Channel
installation menu.
≈Press Menu to quit the menu.
à Tip
To achieve the best results, contact a specialised
antenna installer.
6.6

Factory settings

If you are lost in the picture and sound settings, you
can reset the TV to the factory settings of picture
and sound.
‡ Press Menu on the remote control and select
TV menu > Installation > Factory settings.
® Press π to enter the Factory settings menu.
Ò Press
.
OK
† Press Menu to quit the menu.
rNote
The channel installation settings are not changed.
27