Automatic Channel Set-Up; Intelligent Channel Set-Up; Manual Channel Set-Up; Fine Tuning A Channel - Philips 32PFL5505/V7 User Manual

Channel
Auto Tuning
Intelligent Tuning
Manual Tuning
Fine-Tune 42.25HZ
Sound System DK
Programme Edit
Manual Tuning
Current Channel 1
Band VHFL
Search 49.70 Mhz
Press MENU to return Press EXIT to exit

Automatic Channel Set-up

Channel set-up involves selecting all the settings required to be able to search for and
store all the channels you can receive. Make sure that the television is switched on
and follow all the steps in turn specified hereafter.
Display the menu by pressing the MENU button. Press the left or
to select the Channel icon and press the
the Channel menu.
1. Press the up or down direction button to select
2. Press the left or right
Note: Depending on the number of channels you receive, it may take several
minutes for the channel search to finish. If you want to interrupt the process,
press the MENU button. The channels already found will be stored.
Always start tunning from channel number 1.
3. Channels are arranged in a pre-set order. Refer to the following sections if you want
to fine tune or skip a channel, or swap two channels.

Intelligent Channel Set-up

This operation will keep all the existed channels and add newly found channels to the
end of the channel list.
1. Activate the Channel menu and p
Intelligent Tuning option.
2. Press the left or right
Note: If you want to interrupt the process, press the MENU button. The channels
already found will be stored.

Manual Channel Set-up

Follow the below procedure if you find that some channels have not been stored after
the automatic set-up as well as the intelligent set-up.
1. Activate the Channel menu and p
Manual Tuning option.
2. Press the right direction or OK button to enter the Manual Tuning menu.
3. Select the Current Channel option and press the
a channel number to store the channel that will be found.
4. If necessary, press the up or down direction button to select the Band option and
press the left or right direction button to toggle among VHFH, UHF and VHFL.
5. Press the up or down direction button to select
or right direction button to search manually.
6. Press MENU to return or EXIT to close the menu.

Fine Tuning a Channel

If the picture is not clear you can fine tune the channel.
1. Activate the Channel menu and p
Fine-Tune option.
2. Press the left or right direction button for fine tuning
3. Press MENU to return or EXIT to close the menu.
up or down direction or OK button to display
direction button or OK button to start channel search.
ress the up or down direction button to select
direction or OK button to start intelligent tuning.
ress the up or down direction button to select
ress the up or down direction button to select
right direction button
the Auto Tuning option.
left or right direction button to select
the Search option and press the
the
the
left
the
EN 9