Setup Menu; Preferences - Philips 32PF7320A Manual

Setup menu

Notes: PIP format:
PC formats via HDMI will always be displayed full
screen.
12
This menu is used to control the settings of special TV functions, features and
accessory devices.
The

Preferences

menu allows you to change settings that will typically be
accessed only occasionally.
The Source menu allows you to select a source.
The menu allows you to use your TV as a clock.This setup is necessary
Clock
for the correct working of the Lock after feature.
Preferences
&
Press the button.
MENU
é
Select Setup with the cursor down and press the cursor right to select the
menu.
Preferences
"
Press the cursor right again to select
'
Press the cursor right once more to enter the Picture/sound preferences
menu.
Picture/sound preferences
PIP format
This menu allows you to select the preferred format (PIP or Dual screen)
which can then be displayed toggling the
On or Off .
& Select .
format
PIP
é
Press the cursor right.
" Select or
Dual screen
PIP
Now, when the button on the remote control is pressed and when
PIP
- is selected, the TV shows a full screen of video with a pip window of
PIP
video on top of it.
- is selected, the TV splits the screen into two equally sized
Dual screen
screens.
Remind:
Dual screen/PIP functionality, also called HDMI PIP, is a function used to watch a
broadcast and a HDMI source simultaneously.
• A broadcast can be analog or digital, cable or antenna.
• An external HDMI device (DVD, DVD-R, Set Top Box, A/V receiver,...) must be
connected to HDMI1 or HDMI2.
'
Press the cursor left/right to highlight the PIP window or the left/right
screen in Dual screen.
(
Press the button to change the broadcast channel or the
-CH/PAGE+
button to change the HDMI source in the highlighted screen.
Note: Audio only plays from the main, when PIP has been selected, or the left
screen, when Dual screen has been selected.
Define the position of the PIP screen
&
Press the cursor right to highlight the PIP screen.
é Press the red color button on the remote control to select
Note: If no action has been undertaken, the function buttons at the bottom of the
screen will disappear after a few seconds.
" Use the cursor keys to define the position of the PIP screen.
Auto surround
Sometimes the broadcaster transmits special signals for Surround sound
encoded programs.The TV automatically switches to the best surround
sound mode when
Auto surround
Picture/sound preferences
button on the remote control
PIP
with the cursor up/down.
is switched .
On
.
AV+
.
Position