Getting To Know Your Device; Hardware Installation - Zte MF190 Quick User Manual

ENG

Getting to know your device

The following figure shows the appearance of the MF190. It is only for your
reference. The actual product may be different.

Hardware Installation

1. Put finger on the bottom finger grip, and
then lift the front cover of the modem to
release and rem.
Notes: Do not open the front cover rudely
so as to avoid the damage of the front cover.
2. Insert the SIM/USIM card into the SIM/USIM card slot.
Insert the SIM/USIM card with the metal contact area facing downwards
into the slot, and then push SIM/USIM card as far as possible, shown as the
following picture.
28
1. Indicator
2. Front Cover
3. Modem Cap
4. SIM/USIM card slot
5. MicroSD card slot
6. USB Connector
3. Installing the MicroSD card into the USB modem (the modem is
equipped with a port for MicroSD card, which allows to use it as a USB
drive).
Install the MicroSD card in the USB modem, if needed. The following picture
indicates the correct inserting direction.
The driver of the MicroSD card will be installed automatically when the
modem driver is installed.
ENG
29