Playing Audio Via Bluetooth/Speakerphone Operation - iHome iBT10 Instruction Manual

Playing Audio Via Bluetooth
Once the iBT10 is paired to a device, it will attempt to autolink when the unit is turned on
and the device is within range (about 33 feet). If there is no audio signal for 15 minutes
(Bluetooth or Aux), the unit will power o to save battery life (except in color change and
lantern modes).
1. Press and hold the
indicator will glow solid blue and the cabinet will glow blue when a linked device is in
range and connected. You can then listen to audio streamed wirelessly from your
paired Bluetooth device.
2. Control audio from your device. When Bluetooth audio is active, the status indicator
will glow solid blue.
3. Press the – or + Volume Buttons to adjust the iBT10 volume. A tone will sound when
maximum volume is reached. You can also adjust volume on your device.
4. When done listening, press and hold the
Speakerphone Operation
NOTE: The unit must be powered on and linked to a Bluetooth phone to receive a call.
1. When a call is received, playing music is muted to hear the ring tone. Press
thexxxxTalk/End Button to answer the call. For call waiting function, use phone
controls on your device.
2. When a call is completed, press the
previous function.
Power Button for 2 seconds to turn on the unit. The status
Talk/End Button to end the call and resume
Using the
Power Button to turn the unit OFF.
8
iBT10