Panasonic KX-NS700 Installation Manual page 184

5.7.1 Assigning IP Addressing Information
KX-NT300 series (except KX-NT321) and KX-NT500 series (except KX-NT551)
To start programming
Supply power to the IP-PT.
To enter the IP address of the PBX
Select "PBX".
ENTER
To enter the IP address of the Secondary PBX
Select "Secondary PBX".
To set VLAN parameters
To the VLAN settings
OR
To end programming
Return to the
Menu screen.
*1 For KX-NT300 series: Software version 2.00 or later only
For KX-NT500 series: Software version 1.00 or later only
*2
Optional for KX-NT300 series (Software version 2.00 or later only) and KX-NT500 series (Software version 1.00 or later only)
Note
The illustrations may differ from the buttons on your telephone.
184 Installation Manual
SETUP
Press "SETUP"
when it is displayed.
ENTER Select "PBX IP Address".
PBX IP Address
PBX IP Address
ENTER
STORE
Press "STORE".
ENTER Select "Primary PBX".
ENTER
*2
ENTER
The IP-PT will reboot
and can then be
registered to the PBX.
*1
Document Version 2016-03