TP-Link Auranet EAP110 User Manual page 53

Displays the maximum transmission rate and duplex mode (half-duplex
LAN Port:
or full-duplex) of the port.
Client

MAC: Displays the MAC address of the client of the AP selected in AP List.
SSID: Displays the SSID the client is connected to.
Signal to Noise Ratio, the power ratio between the received wireless signal
SNR(dB):
strength and the environmental noise strength. The bigger the value of SNR
is, the better network performance the device provides.
CCQ(%): Displays the wireless Client Connection Quality (CCQ). CCQ refers to the
ratio of current effective transmission bandwidth and the theoretically
maximum available bandwidth. CCQ reflects the actual link condition.
Rate(Mbps): Displays the data rate at which the client transmits wireless packets.
Down(Byte): Displays the throughput of the downstream data.
Up(Byte): Displays the throughput of the upstream data.
Active Time: Displays the amount of time the client has been connected to the device.
LAN Traffic

Click LAN Traffic and you can monitor the data transmission status of the LAN port.
Figure 6-6 Client
Figure 6-7 LAN Traffic
42