TP-Link Auranet EAP110 User Manual page 22

Type: Select the authentication type for WEP.
Auto: The default setting is Auto, which can select Open System or

Shared Key automatically based on the wireless station's capability and
request.
Open System: After you select Open System, clients can pass the

authentication and associate with the wireless network without
password. However, correct password is necessary for data
transmission.
Shared Key: After you select Shared Key, clients has to input password

to pass the authentication, or it cannot associate with the wireless
network or transmit data.
Key Selected: You can configure four keys in advance and select one as the present
valid key.
Wep Key Select the wep key format ASCII or Hexadecimal.
Format:
ASCII: ASCII format stands for any combination of keyboard characters

in the specified length.
Hexadecimal: Hexadecimal format stands for any combination of

hexadecimal digits (0-9, a-f, A-F) in the specified length.
Key Type: Select the WEP key length for encryption.
64-bit: You can enter 10 hexadecimal digits (any combination of 0-9, a-

f, A-F without null key) or 5 ASCII characters.
128-bit: You can enter 26 hexadecimal digits (any combination of 0-9,

a-f, A-F without null key) or 13 ASCII characters.
152-bit: You can enter 32 hexadecimal digits (any combination of 0-9,

a-f, A-F without null key) or 16 ASCII characters.
Key Value: Enter the key value.
Figure 5-5 Security Mode-WEP
11