Display Settings - JVC KD-R681 Instruction Manual

AUDIO SETTINGS
Connection via speaker leads
For connections without using an external amplifier. However, with
this settings you can also enjoy the subwoofer output. ( 17)
Setting on
[SPK/PRE OUT]
REAR/REAR Rear speakers output
REAR/SUB.W (default) Rear speakers output
SUB.W/SUB.W Subwoofer output
If [SUB.W/SUB.W] is selected:
– [FRQ 120HZ] is selected in [SUBWOOFER LPF] and [FRQ THROUGH] is not
available.
– [POSITION R01] is selected in [FADER] and selectable range is
[POSITION R06] to [POSITION 00].
Audio signal through rear speaker lead
L (left) R (right)
Rear speakers output
Rear speakers output
(Mute)

DISPLAY SETTINGS

Symbolic button
1
Press and hold .
2
Press to select an item (see the following table), then press
.
3 2
Repeat step until the desired item is selected/activated or follow
the instructions stated on the selected item.
4 Press to exit.
To return to the previous setting item, press
DISPLAY
DIMMER Dim the illumination.
OFF: Dimmer is turned off. Brightness changes to [DAY] setting.
ON: Dimmer is turned on. Brightness changes to [NIGHT] setting.
( 12, [BRIGHTNESS])
DIMMER TIME: Set the dimmer on and off time.
1 Press
2 Press
(Default: [ON]: 18:00 ; [OFF]: 6:00)
DIMMER AUTO: Dimmer turns on and off automatically when you turn off or on
the car headlights. * 1
* 1
The illumination control wire connection is required. ( 17)
.
to adjust the [ON] time, then press
to adjust the [OFF] time, then press
ENGLISH
Default: XX
.
.
11