Samsung SGH-L600 Service Manual page 17

Disassembly and Assembly Instructions
9 9
4
2
1) After Place the Front on the Lower, Tighten 4
screws.
2) Place the Key-PAD on the Front.
1) Don't scratch the surface of the handset.
Please pay attention.
11
1) Attach the Volume and Camera key FPCB on the Ribs.
2) Insert the Volume, Camera and power key to guide
holes.
1) Pay attention to the direction.
1
3
Pay attention to
the guide hole
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
10
1) Attache the shading tape on the Main PBA base line
1) Insert S-FPCB on the Main PBA Connector.
1) Be careful to damage the S-FPCB.
12
1
1) Put in the Lower on the Fornt from Top to
bottom clockwise.
1) Pay attention to gap.
11-8
1
3
2