Assembly Instructions - Samsung SGH-L600 Service Manual

Disassembly and Assembly Instructions

11-2. Assembly Instructions

1
+ -
1) Solder the wire of the Speaker and Bond it.
1) Solder with paying attention to the polarity.
2) Bond with paying attention to the base line of the
bond.
3
1) Open the Actuator on the Sub PCB.
2) Insert S-FPCB to the Actuator
and Close the Actuator.
1) Be careful to damage the S-FPCB
The base line of
the Bond : Over
the line of the
polarity sign
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
2
1) Insert the Camera FPCB to the small Actuator.
2) Insert the SUB Pba-FPCB to the other Actuator.
3) Attach the Insulting tape on the Actuators
1) Be careful to damage the Camera and Sub PCB-FPCB
4
1) Attach the Insulting tape on the Actuator.
1) Pay attention to the base line.
11-6
The base line
Over the white
line
The bse line
End of the
Actuator