Panasonic KX-NS1000 Operating Manual page 52

Pure ip-pbx
Hide thumbs Also See for KX-NS1000:
Table of Contents

Advertisement

1.3.11 Call Transfer
SIP Extn.
During a conversation
OR
HOLD
KX-UT series:
Press TRANSFER.
Other than KX-UT series:
Press HOLD.
To transfer with one touch (One-touch Transfer)
PT/PS/KX-UT133/KX-UT136/KX-UT248/KX-UT670
During a conversation with an outside party
(DSS)
Press DSS.
52
Operating Manual
extension no.
C.Tone
KX-UT series
only.
Dial extension number.
* For SIP phone users, instead of going on-hook, if you press the TRANSFER button
(KX-UT series [except KX-UT670]), Transfer Cancel button (KX-UT670) once, or the
HOLD button (non-KX-UT series) once or twice (depending on the telephone being
used), you can return to the held call. The call with the transferred party will be
disconnected.
For KX-UT series SIP phone users, if you go on-hook while a call to be transferred is
still on hold, you will hear an alarm (Hold Recall) immediately.
For other types of telephone users, if the call is not transferred within a specified time,
you will hear an alarm (Hold Recall).
For the transfer operation using an SDN button, refer to "1.3.50 PDN (Primary Directory
Number)/SDN (Secondary Directory Number) Extension".
Talk.
This step can be omitted.
System programming is required to use the One-touch Transfer feature during a
conversation with an extension.
Talk.
This step can be omitted
(KX-UT series only).
On-hook.
*
On-hook.
Document Version 2013-04

Advertisement

Table of Contents
loading

Table of Contents