Hardware Description; Antenna; Power Jack; Led Indications - Calixto xE910 User Manual

5. Hardware Description

5.1 Antenna

Antenna connector allows transmission of radio frequency (RF) signals between the modem and an external
customer-supplied antenna. Calixto provides option one of the two antenna connectors. One is uFL and other
one is 50ΩFME male coaxial jack. As an option Calixto provides WIP Antenna with 50ΩFME male coaxial jack
connector.
For modules with GPS functionality, there is a provision for uFL and SMA connector.

5.2 Power Jack

The power Jack supported is 2mm DC power jack with locking option. The figure below shows the power jack
used in the modem.

5.3 LED Indications

There are two LEDs in the xE910 modem.
MODULE status LED. For CST-xE910-xx- BC, there is an additional Charging Indicator LED (D4).

5.4 Battery connector

CST-xE910-MODEM-BC modem has additional battery connector. This is a 2 pin RELIMATE connector (location
B1).
5.5 USB – Mini USB connector:
Calixto xE910 modems come with USB device connector (at J4). USB is directly connected to USB signals of modules.
Please note that GE910-QUAD-V3 does not have USB interface.
The LED1 (at D3) is POWER indicator LED The LED1 (at D8) is