Default Settings - Cisco MDS 9000 series Configuration Manual

Default Settings

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Example 7-6
switch# show ips stats ip interface gigabitethernet 4/1
Internet Protocol Statistics for port GigabitEthernet4/1

Default Settings

Table 7-2
Table 7-2
Parameters
IPv4 MTU frame size
Autonegotiation
Promiscuous mode
Cisco MDS 9000 Family NX-OS IP Services Configuration Guide
7-10
Displays IPv4 Statistics
168 total received, 168 good, 0 error
0 reassembly required, 0 reassembled ok, 0 dropped after timeout
371 packets sent, 0 outgoing dropped, 0 dropped no route
0 fragments created, 0 cannot fragment
lists the default settings for IPv4 parameters.
Default IPv4 Parameters
Chapter 7 Configuring IPv4 for Gigabit Ethernet Interfaces
Default
1500 bytes for all Ethernet ports
Enabled
Disabled
OL-19525-01,Cisco MDS NX-OS Release 4.2(1)