Table of Contents
Advertisement
Dimming control offers two choices; Manual and Au-
tomatic. In both cases, a 10-segment horizontal bar
graph is displayed with a "-" sign to the left, and a "+"
sign to the right. The current setting is indicated on
the bar graph by a reverse image segment.
The Font Type allows the user to select the appear-
ance of text on the Shuttle display.
FM Transmitter Options
The following adjustments are possible:
FM On/ Off
Frequency Selection
FM On/Off:
Upon entering this mode, rotating the Rotary
Encoder knob to toggle between the FM ON
or FM OFF function/display selection. To select
and/or exit this function, press the Encoder
knob. (No button activity for 10 seconds will
also exit this function.)
FM Transmitter Option
ON/OFF
Frequency Selection
NOTE: It is recommended that you turn the FM
Frequency Setting:
Upon entering this mode, any FM transmitter
frequency can be chosen using the Category
Up/Down buttons for coarse (1.0MHz steps)
frequency selection, and the encoder knob for fine
(200kHz steps) frequency selection.
For example, to increment and decrement a fre-
quency of 1.0MHz within the minimum
(88.1MHz) and maximum FM frequency range,
press the Category Up/Down button as
necessary to enter the desired range (e.g.,
89.1MHz to 90.1MHz); then use the encoder
knob to choose the desired frequency within
that range in 200kHz steps.
ON/OFF
ON
Press the select button to enter the new frequency
OFF
setting, or press the MENU button to return to the
menu options page with no change to frequency.
-19-
Transmitter off if you are using the low level
audio outputs in your particular application.
128-7193A
19 of 32
Advertisement
Table of Contents
