Complete Installation Checklist - Whirlpool W10856086A Use & Care Manual

16.
Tighten leveling feet
Jam nut
When washer is level and all four feet are firmly in contact with
the floor, use a 1/2" or 13 mm open-end or adjustable wrench
to turn jam nuts counterclockwise on leveling feet tightly
against washer cabinet.
HELPFUL TIP: You may want to prop washer with
wooden block.
17.
Plug into a grounded 3-prong outlet
24

Complete Installation Checklist

q
Check electrical requirements. Be sure you have correct
electrical supply and recommended grounding method.
q
Check that all parts are now installed. If there is an extra
part, go back through steps to see what was skipped.
q
Check that you have all of your tools.
q
Check that transport bolts were completely
removed from back of washer.
q
Check that hose is attached and water faucet is on.
q
Check for leaks around faucet, valve, and inlet hose.
q
Remove any tape remaining on washer.
q
Check that washer is plugged into a grounded
3-prong outlet.
q
Dispose of/recycle all packaging materials.
q
Read "Using Your Washer."
q
To test and clean your washer, turn on the washer and
choose the Normal cycle and run it without clothes. Use only
HE detergent. Use 1/2 the manufacturer's recommended
amount for a medium-size load.