JVC LT-32C50BU Service Manual page 17

4.5.3 DESCRIPTION OF STATUS DISPLAY
SETTINGITEM No. SETTING ITEM
S001 PREPARE S001 PREPARE
PAL50 PAL50 FULL FULL
SIGNAL SYSTEM ZOOM MODE
(1) SIGNAL SYSTEM
The signal displayed on the screen is displayed.
PAL50 : PAL50Hz (Composite / S-video)
PAL60 : PAL60Hz (Composite / S-video)
SECAM : SECAM
NTSC3 : NTSC3.58
NTSC4 : NTSC4.43
525I : 525i (Component)
525P : 525p
625I : 625i (Component)
625P : 625p
1125I5 : 1125i 50Hz
1125I6 : 1125i 60Hz
PCVGA : PC (VGA)
(2) ZOOM MODE
State of the SCREEN SIZE or MULTI PICTURE is displayed.
SINGLE SCREEN
FULL : FULL
PANO : PANORAMIC
1609 : 16:9 ZOOM
1609S : 16:9 ZOOM SUBTITLE
1409 : 14:9 ZOOM
REGU : REGULAR
MULTI SCREEN
FRZ : Freeze
M2 : 2-pictures multi
M12 : 12-pictures multi
(3) PICTURE MODE
STD : STANDARD
BRI : BRIGHT
SOFT : SOFT
(4) COLOUR TEMP.
H : WARM
M : NORMAL
L : COOL
SETTING VALUE (DATA) COLOUR TEMP.
000 000
STD STD M M
PICTURE MODE
(5) SETTING ITEM NAME
Setting item name are displayed. The setting item numbers to
be displayed are listed below.
Item No.
S001 to S039 Video sytetem setting
T001 to T010 Audio sytetem setting
P001 to P010 Panel control sytetem setting
D001 to D187 Drive sytetem setting
Z001 to Z010 Main cpu system setting
(6) SETTING ITEM NO.
Setting item numbers are displayed. For the setting item
names to be displayed, refer to "INITIAL SETTING VALUES
IN THE SERVICE MODE".
(7) SETTING VALUE (DATA)
The SETTING VALUE is displayed.
4.5.4 CHANGE AND MEMORY OF SETTING VALUE
SELECTION OF SETTING ITEM
• [FUNCTION / ] key.
For scrolling up / down the setting items.
S001... ↔ T001... ↔ P001... ↔ D001... ↔ Z001...
CHANGE OF SETTING VALUE (DATA)
• [FUNCTION / ] key.
For scrolling up / down the setting values.
MEMORY OF SETTING VALUE (DATA)
Changed setting value is memorized by pressing [MUTING]
key.
4.5.5 SERVICE MODE SELECT KEY LOCATION
MUTING
NUMBER
INFORMATION
ZOOM (Red)
FUNCTION /
Setting item
VCR/TV/DVD
switch
3D SOUND (Green)
MENU
FUNCTION /
(No.YA204)1-17