Blind Spot Information (Blis) - Volvo XC 90 Quick Manual

Leaving a parking space using PAP
This function can only be used for parallel parking.
Park out
1. Tap in Function view.
2. Follow the instructions on the center display.
Park Assist Camera*
This camera helps the driver see what is around the vehicle
and to indicate potential obstructions using a camera
image and graphics in the center display. The camera view
and guiding lines are selected in the center display. The
camera starts automatically when the gear selector is in
R. This setting is made in the center display's Top view in
Settings, My Car > Park Assist > Auto Camera Reverse
Activation. The camera can also be started manually by
Camera
tapping the button in Function view to activate/
deactivate.
Lane Keeping Aid (LKA)*
If the vehicle is about to inadvertently cross a driving lane's
marker lines, LKA will actively guide the vehicle back into
the lane through slight force on the steering wheel. When
the vehicle reaches or crosses a line, the driver will be
alerted by an audible signal or vibrations in the steering
wheel.
Lane Keeping Aid
– Tap the button in Function view to
activate/deactivate.
LKA settings can be made in the center display's Top
view under Settings. Select My Car > IntelliSafe > Lane
Keeping Aid.

Blind Spot Information (BLIS)*

BLIS informs the driver of vehicles in the door mirrors' blind
angles or of rapidly approaching vehicles in the driving
lanes to the right and/or left of your vehicle.
BLIS
– Tap the button in Function view to activate/
deactivate.
Cross Traffic Alert (CTA)*
CTA alerts the driver to crossing traffic behind your vehicle
when backing up or if reverse gear is selected. CTA is
activated automatically when the engine is started.
Cross Traffic Alert
– Tap the button in Function view to
activate/deactivate.
03