1
Display Only Power OFF
Elapsed time
A
Internal
(Time elapsed
STEP
function
after start of
Power ON)
STEP0
sy_poff0
STEP1
sy_poff1
STEP2
sy_poff2
STEP3
sy_poff3
B
STEP4
sy_poff4
Possible Fail-safe at Power OFF
<< Detection of abnormity in PROTECT terminal (22P) >>...For the detailed specification of PROTECT, see the section 7.1.9.
When this terminal detects a failed state, the machine will stand by automatically 2 seconds after the system Power ON.
Then, the TIMER indicator will flash on and off.
<< Detection of abnormity in 3.3 DETECT terminal (17P)>>...For the detailed specification of PROTECT, see the section 7.1.9.
C
When this terminal detects a failed state, the machine will stand by automatically 2 seconds after the system Power ON.
Then, the TIMER indicator will flash on and off.
<< Failure in BUS communication >>
•
Defect in communication with DVD
After start of BUS communication, if proper communication is not conducted for 4.3 seconds in a row, the DVDRESET
terminal (93P) will be set to the limited time "L".
•
Defect in communication with MD
After start of BUS communication, if proper communication is not conducted for 2.5 seconds in a row, the MDRESET
terminal (35P) will be set to the limited time "L".
<< Abnormal termination of DVD >>
D
•
Due to any other abnormal condition, If DVD cannot be put into a complete stop with Power OFF, after 20 seconds, the
machine will be forcefully powered off and enter in the stand-by state.
<<Abnormal termination of MD >>
•
Due to any other abnormal condition, If MD cannot be put into a complete stop with Power OFF, after 50 seconds, the
machine will be forcefully powered off and enter in the stand-by state.
E
F
82
1
2
Start of Power OFF ("See you !" lights up.)
0ms
•
All the buttons are disabled to prevent malfunction.
4620ms
4710ms
End of LCD display ("See you !" lights out.)
Stop of power supply to the LCD driver, etc.
* After SYSPOW2 terminal becomes H
4760ms
abnormity in the PROTECT terminal (22P) will not be
conducted.
Final Power OFF control
5000ms
Control of output terminal to the "L" output
All the buttons are disabled for 3 seconds after completion of
Power OFF.
2
3
Contents of Control
→
L, the detection of
XV-HA5
3
4
Major control terminal
→
SYSPOW2(92P) H
L
→
SYSPOW(41P) H
L
4