2.3. LED indicator
The LED shows the present status of the network and error.
Layout of LED
COM
ERR
The option has two LEDs. Those function are below table.
COM
OFF
(Green)
ERR
(Red)
1s
A
State
COM LED: OFF
A
ERR LED: Flashing 5 times in 1 sec
COM LED: OFF
B
ERR LED: 3 times in 2 sec, Off for 1 sec
COM LED: ON
C
ERR LED: OFF 0.5 sec, ON 0.5 sec
COM LED: Flashing
D
ERR LED: OFF
COM LED: OFF
E
ERR LED: Flashing
COM LED: OFF
F
ERR LED: OFF
2.1
2.2
2.3
2.4
2.5
OFF
2s
1s
B
LEDs
- 7 -
ON
OFF
1s
C
D
Comment
®
Metasys
N2 failure.
Communication loss detected. Confirm the
network condition and connection of the cable.
Invalid configuration detected.
Note: When inverter occurred in e-23 or e-24 ,
the LED becomes this state.
Valid message received for this node
Invalid message received (any node)
No communication
Confirm the network condition and connection
of the cable.
E6581539
OFF
OFF
OFF
E
F