Vlan Command - D-Link DAP-2695 Command Line Interface Reference Manual

Get Command:
get vlanstate
get vlanmode
get autosetpvid
get pvid_primary
get pvid_eth
get pvid_sys
get groupvid_primary
get groupvid_eth
get groupvid_sys
get wds-pvid
get wds-groupvid
get wds-updownlink
get multi-pvid
get multi-groupvid
Set Command:
set vlanstate
set vlanmode
set autosetpvid
set pvid_primary
set pvid_eth
802.11 b/g /n Access Point Command Line Interface Manual
Function
Display VLAN state
Display VLAN mode
Display auto setting pvid by group VID
Display primary SSID PVID
Display ethernet PVID
Display system PVID
Display wlan port member of group VID
Display LAN port member of group VID
Display System port member of group VID
Get PVID of WDS[index]
Get group VID of WDS[index]
Get uplink/downlink state of WDS[index]
Display PVID of Multi-SSID[index]
Display Group VID of Multi-SSID[index]
Function
Set VLAN state
Set VLAN mode
Auto setting pvid by group VID
Set primary SSID PVID
Set ethernet PVID
get vlanstate
get vlanmode
get autosetpvid
get pvid_primary
get pvid_eth
get pvid_sys
get groupvid_primary
get groupvid_eth
get groupvid_sys
get wds-pvid
get wds-groupvid [index]
get wds-updownlink [index]
get multi-pvid [index]
get multi-groupvid [index]
set vlanstate
set vlanmode
set autosetpvid
set pvid_primary
set pvid_eth
21
7

VLAN COMMAND

Syntax
Syntax