Samsung SNH-V6430BNH User Manual page 20

Item
Converts the current image to full screen size.
Full screen
The system supports Internet Explorer only.
`
m
If you double-click the screen, the full screen mode is terminated.
`
Brightness
You can adjust the brightness of the screen image.
n
Hide/unhide detailed
Click on the [
o
menu
Adjust the volume of the internal microphone in the camera.
If the volume of the microphone is set to '0', the live video will be
Audio
p
inaudible. Also, since the audio event does not occur, it will not be
recorded on the SD card.
Add a camera
Click the [
q
❖ wireless network Speed
Profile Name Resolution
Low Speed Network VGA
Mid Speed Network HD(720P)
High Speed Network Full HD(1080P)
20 · English
Description
] icon to unhide or hide detailed setting menu.
] icon to register an additional camera.
Recommended
Frame rate
bandwidth
10 fps 0.7Mbps
15 fps 1.5Mbps
30 fps 3.5Mbps
What is relay mode?
`
n
If the network condition is unstable, the camera cannot make a normal connection
(P2P), so it will set up a connection in relay mode. In this case, you will see the video
for the first seven minutes only.
Relay mode is added feature where the video from the camera is transmitted to
`
Samsung server then retransmitted to the user's computer.
If you have trouble connection to the camera, visit "http://www.samsungsmartcam.
`
com", go to support page, and refer to "Troubleshooting" on it.
It is recommended to use one browser at one time.
`
The Night Vision video produces a different visibility according to the distance between
`
camera and subject.
The number of available concurrent users for a single camera may vary depending on
`
the speed of your Wi-Fi router.
❖ Motion Zone Setting
Click the < > icon.
1)
Drag it to the screen to set the detection area.
2)
Click on <ok>.
3)
If you want to delete the set area, click on <delete all>.
The <Motion Detection> function needs to be activated in order to use the motion
`
n
zone function.
You can set up to 3 motion zones.
`